Is Your Washer Leaking From Bottom? Here we have given here quick DIY fixes on how to fix the Washing Machine Leaking From Bottom Issue. Washer Leaks can be due to many issues with the Washer which is causing the leak. A washer can leak from the bottom during fill, from underneath, during wash cycle or sometimes even when not in use. Below are solutions that can work on both front load and top load washing machines.
How To Fix A Washer Leaking From Bottom
Don’t panic when you see that the washing machine is leaking from the bottom and all the water is pouring to the floor. Normally the issue will be small and can be done quickly using a few handy tools at home in much less time. Some issues may require you to get help from professionals, but mostly can be solved by yourself. Loud washer can also be leaky sometimes. So, let’s check it out.
Fix#1: Check Supply Hoses
The most common cause for the water leaking from the washer is due to the Leaky supply hose. First tighten the supply hose Connection. If the water still leaks then you need to see if the supply hose is faulty or not. For troubleshooting, do the following steps:
- Empty the washing machine.
- Slide the Washer from the wall (about 12 inches).
- Start the washing machine Fill Cycle.
- Now carefully observe to see if there are any leaks in the supply hose connection.
- Check also for signs of any corrosion or any visible damage to the hose.
Once you have determined that the water is leaking from the supply hose, then take the following steps to fix it.
- Unplug the washing machine from the power supply.
- Turn off the water main Valve.
- Take a adjustable pliers and use them to Unscrew the Supply hose from the back of the washer.
- Remove the old hose using the flat-blade screwdriver.
- If you see that the old hose is damaged or corroded, then replace it with a new hose.
- But a new gasket and Install the new gasket.
- Connect the supply hoses.
- Tighten each end securely.
Hopefully now the water leakage has stopped. If the issue still persists then proceed to the next step.
Fix#2: Replace leaky internal hoses
If you have determined that the supply hoses are not leaking, then another possible reason may be that the internal hose is leaking. So, to troubleshoot, do the following:
- Unscrew and Open the Cabinet of the washing machine.
- Carefully check the components inside it.
- Now access the direct drive machine.
- Now remove the entire cabined by prying up the cabinet clips.
- Now restart the washer fill cycle.
- See if the water is leaking from the internal hose.
- Check also for any corrosion or damage signs.
If you see that water is leaking, then the most possible cause is that either the spring clamp has worn out or the hose is faulty or damaged. So, to fix it, do the following steps.
- Take adjustable pliers or a special hose clamp pliers. You can buy it from Amazon or buy it from local stores.
- Using pliers, remove the worn out spring camp with a new one.
- If the hose is leaking and has a crack or damage on it, then remove it.
- Replace the old internal hose with the new one.
Hopefully now the Washer Leaking From Bottom issue has been resolved. Still having an issue? then check the solution below.
Fix#3: Position Drain Hose Correctly
Sometimes the drain hose is not positioned correctly, which is results n washing machine leaking from bottom. Follow the steps below to fix the issue:
- Make sure that the washer drain hose is less than 6 inches into the washer tub.
- Check all the connections and make sure that the drain hose is connected securely.
- Take a zip-tie and use it to tie the drain hose to the standpipe.
- Make sure that the standpipe length is between 18 and 9 inches.
- Remove any bends or twists in the drainpipe and standpipe to remove any water blockage.
- Also check the hose retainer and see if there are any damage signs or not.
- Also make sure that the washing machine is level to the floor and it is not tilting.
This should resolve the issue. The next step is to check the pump. So let’s check it out.
Fix#4: Check the Drain Pump
- Inspect the drain pump and see if you see any water leaking.
- You also need to check if the hose is properly connected to the pump and see if it has any water leakage.
- Inspect hose clamps on the water lines. Tighten them if required. If you see any damage then replace it.
- Tighten the water hose. if the water hose is leaking, then replace it.
- If the drain pump is leaking, then you need to repair it or replace it with a new pump.
The above solutions can work for all popular brands including:
We hope that Washer Leaking From Bottom is now solved. If the problem still persists then do contact the repair service company. If your washing machine is new, It can still be covered under warranty. We have also given the solution for Washing Machine Spinning But Clothes Still Wet on our website.